What is Data Recovery RAID?
Do you miss some data from your device? Now, what are you going to do? Maybe Data Recovery RAID helpful for you. The reason why users need Data Recovery RAID is the same as normal hard disk data recovery. A damaged or corrupted RAID can be caused by several factors. They are like:
- Malware infection
- Mechanical fault
- Human error
- Hardware or software failure
- Power outage
- Bad sectors
- Sudden system shutdown
But, it is a different level when you want to recover a damaged RAID. If RAID is corrupted, the RAID volume becomes inaccessible, and data is lost.
In this case, you cannot access Data Recovery RAID from RAID hard drive directly. You will need to reconstruct or rebuild the RAID configuration to recover the lost data. Of course, it is a bit difficult. That is why some third-party data recovery software’s available for you.
Best Data Recovery RAID Software
One of the best ones is EaseUS Data Recovery Wizard. If you want to recover data from RAID drives, you should choose a professional RAID recovery software is very helpful! EaseUS Data Recovery Wizard offers a complete RAID data recovery solution under Windows. It supports RAID 0, RAID 1, RAID 5, or RAID 10. The EaseUS RAID recovery software will help you recover data from any RAID hard drive.
Recommendations:
- Recover data from multiple RAID levels
- Recover files from failed RAID drives
- Recover lost or formatted RAID logical volumes
General Knowledge about Data Recovery RAID
RAID stands for Redundant Array of Inexpensive Disks or Redundant Array of Independent Disks. It is a data storage virtualization technology that provides restoration. The way to store the same data can be in different places on multiple physical hard disks. The purpose is to increase the system performance or provide fault tolerance.
Different RAID Levels and the Definitions
Data is allocated on RAID hard drives in different ways. They are referred to as RAID levels. You can find RAID 0, 1, 2, 3, 4, 5, 6, and 10 as the levels. Here is more to know about each RAID level:
-
RAID 0 (Striped Disk Array without Fault Tolerance)
RAID 0 provides data striping such as spreading blocks of each file over multiple disk drives. But, it has no redundancy. Level 0 improves performance but provides no fault tolerance. Once drive fails, all data in the array will be lost.
-
RAID 1 (Volume Mirroring)
RAID 1 offers disk mirroring. This level provides twice the read transaction speed of a single disk. Also, it provides the same write transaction speed as a single disk.
-
RAID 5 (Block Interleaved Distributed Parity)
RAID 5 provides data striping at the byte level and stripe error correction information. This results in excellent performance with good fault tolerance. Level 5 is cane said the most popular RAID implementations. It is important to know how to back up RAID drives to avoid losing data.
-
RAID 6 (Independent Data Disks with Dual Parity)
RAID 6 needs a minimum of four disks. Level 6 uses 2 parity lines on each disk. And it allows two disk failures in a RAID set. Dual parity makes it provide high fault tolerance. Of course, it is more expensive because 2 additional disks are required for parity.
-
RAID 10 or RAID 1+0 (A Mirror of Stripes)
RAID 10 is known as RAID 1+0. Indeed, it is not the original RAID level. Two RAID 0 strips are created with the addition of RAID 1 mirror on top of it. Mostly, it is used to replicate and share data between disks.
Advantages of RAID
RAID uses multiple disks working together. The goal is to improve overall system performance for computer users, moreover server users. There are more benefits:
- Higher data security
- Higher fault tolerance
- Improved parity checks and regularly checks for possible system crashes
- Simultaneous reading and writing process
How to Process Data Recovery RAID from Raid Hard Drive
-
Step 1: Scan RAID drives
Select the RAID drive where you want to recover the data. And click “Scan”. Wait until the scanning process is complete. The deleted files then will appear one by one.
-
Step 2: Find & Preview the Missing RAID file
Use “Filters” as a quick navigation to find lost files. Or, you can also use “Search” to find your lost drive Raid files based on file name or extension.
-
Step 3: Recover lost RAID drive files
Select the desired file, and then click “Recover”. After that, browse to save these files to another safe location.
What can You do with Data Recovery Raid?
- Recover files from common hard drives, SD cards, USB flash drives, external hard drives, and other conventional storage devices
- Recover permanently deleted system crashes, files, OS reinstallation and other challenging data loss situations
Capture photos, audio files, videos, Microsoft Offices files, Adobe files, and 200+ other files